Dynaudio BM5 mkIII Panduan Pemilik - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem stereo Dynaudio BM5 mkIII. Dynaudio BM5 mkIII 16 halaman. Active monitor system
Juga untuk Dynaudio BM5 mkIII: Panduan Pemilik (9 halaman), Panduan Pengguna (16 halaman)
Halaman Cetak
Miscellaneous
Miscellaneous
Troubleshooting
If the Power LED lights green, but you hear
no sound, check your input signal, i.e. by
switching speakers.
Care
Components of the highest quality are
used in your BM5 mkIII. This assures years
of trouble-free operation. Following pre-
cautions should still be made though.
Avoid running the system into severe clip-
ping. Although there is an advanced pro-
tection system, you may be able to destroy
your speakers by severe overpowering
them. The limiter works over a certain
range, but exceeding this level may send
a severely clipped signal to your driv-
ers. When a noticeable distortion occurs,
please turn down the level to your speak-
ers.
Avoid hot-plugging the equipment con-
nected to the monitors. Always turn off the
speaker and other equipment when plug-
ging or unplugging signals, or switching
equipment on or off.
Do not touch the drive units by hand. The
tweeter especially uses a very fine fabric
dome with an ultra-thin coating.
Options
Companion subwoofers for the Dynaudio
BM series are the BM9 S II and BM14 S II
Precision Subwoofers. Learn more about
these subwoofers at:
www.dynaudioprofessional.com
8
Service
There are no user serviceable parts inside
the monitor. If service is required please
contact service via:
www.tcsupport.tc
or
TC Electronic
Sindalsvej 34
DK-8240 Risskov
Denmark
Tel: +45 87 42 70 00
BM5 mkIII