HighPoint R1000 Series Panduan Instalasi Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Pengontrol HighPoint R1000 Series. HighPoint R1000 Series 10 halaman. 4x m.2 port to pcie 3.0 x8/x16 nvme hba's
Juga untuk HighPoint R1000 Series: Panduan Instalasi Cepat (8 halaman), Panduan Instalasi Cepat (9 halaman)
Halaman Cetak
R1108 Hardware Installation:
Step 1. On the rear of the R1108, remove the six screws that secure the
unit's heat sink to the PCB.
Step 2. Carefully remove fan's power cable from the right-side of the
heatsink as shown below, then carefully flip the heatsink to the
left (like turning a page from a book).
Note: Take care when moving the heatsink to prevent damaging
the left fan's power cable.
4