Emerson Bettis RTS Panduan Pemasangan, Pengoperasian, dan Pemeliharaan - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Pengoperasian, dan Pemeliharaan untuk Peralatan Industri Emerson Bettis RTS. Emerson Bettis RTS 18 halaman. Extension board for modbus rtu
Juga untuk Emerson Bettis RTS: Panduan Servis (18 halaman), Panduan Pemasangan, Pengoperasian, dan Pemeliharaan (16 halaman), Panduan Pemasangan, Pengoperasian, dan Pemeliharaan (18 halaman), Panduan Pemasangan, Pengoperasian, dan Pemeliharaan (16 halaman)
Halaman Cetak
Section 4: Input and Output Data
November 2021
4.2.4
Actual Speed Value
Register number: 260, address 0103
Data format: 16 bit, only the lowest 8 bit (Bit 7: Direction OPEN; Bit 6 - 0 : 0 - 100
corresponding to 0 - 100%) are in use.
Other bits are reserved for future use and have to be set to zero.
4.2.5
External Actual Value
Only with Option PID-Controller
Register number: 261, address 0104
Data format: 16 bit, only the lowest 10 bit (0 - 1023) are in use.
Other bits are reserved for future use and have to be set to zero.
4.2.6
Status 2
Register number: 262, address 0105
Data format: 16 bit (Bitfield)
Table 9.
Bit no.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NOTE:
Using parameter P15.6 it is possible to assign alternative output-functions to "Status 2".
12
Installation, Operation and Maintenance Manual
Structure
Description
Function
Bit = 0 Bit = 1
Dig. Output 1
-
Dig. Output 2
-
Dig. Output 3
-
Dig. Output 4
-
Dig. Output 5
-
Dig. Output 6
-
Dig. Output 7
-
Dig. Output 8
Dig. Input 1
-
Dig. Input 2
-
Dig. Input 3
-
Dig. Input 4
-
Dig. Input 5
-
PHASE SEQUENCE
-
FC ERROR
-
FAILSAFE ERROR
-
Hex
Hex
Hex
Corresponding binary output enabled.
Corresponding binary input enabled.
Phase Sequence Error: wrong phase order, phase failure,
total failure, asymmetry.
FC Error: Error in power supply or frequency converter (if present).
Failsafe-Unit not ready (if present).
VCIOM-16741-EN Rev. 0
Input and Output Data