HighPoint SSD7101A-1 Panduan Instalasi Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Pengontrol HighPoint SSD7101A-1. HighPoint SSD7101A-1 7 halaman. Using nvme raid aics with the dell precision 3930 rack workstation
Juga untuk HighPoint SSD7101A-1: Panduan Pengguna (19 halaman), Panduan Instalasi Cepat (8 halaman), Panduan Instalasi Cepat (9 halaman), Panduan Instalasi Cepat (6 halaman), Menggunakan Manual (19 halaman)
Halaman Cetak
Step 6. Replace the front panel after installing all SSDs.
Step 7. On the rear of the SSD7101A-1, refasten the 6 screws that were
removed in step 1.
Note:
Make sure the aluminum cover is properly aligned with the
controller board (PCB), and that it makes full contact with the
thermal pad, before refastening it to the SSD7101A-1. If the cover
is improperly installed, the fan and thermal pad will be unable to
sufficiently cool the NVMe SSD's and controller componentry,
which may result in damage to the SSD's or controller hardware,
performance loss, unstable I/O, and the loss of data.
6