HighPoint SSD7505 Panduan Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol HighPoint SSD7505. HighPoint SSD7505 19 halaman. Using nvme raid aics with the dell precision 3930 rack workstation
Juga untuk HighPoint SSD7505: Panduan Instalasi (14 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (15 halaman), Panduan Instalasi Cepat (6 halaman), Panduan Instalasi Cepat (8 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (16 halaman), Menggunakan Manual (19 halaman)

HighPoint NVMe Boot RAID Windows Installation Guide

Trouble shooting

In the UEFI environment, run the command, " go.nsh (Please see UEFI Read me for specific

input content.)"

Solutions: If you get the message, "No supporting host adapter is found. "Try the following,

a. The error message is to remind the user that when the card cannot be found in UEFI. Make

sure the NVMe product is installed into a PCIe slot with x8 or x16 lane.

b. In order to avoid this slot is broken, so replace the slot and test again.

In the UEFI environment, run the command, "ArrayCreate.efi".

Solutions: If you get the message, "No supported controller detected." Try the following,

Check whether the Storage option ROM is Enabled in the motherboard BIOS.

Check whether NVMe is connected to the controller.

Replace the motherboard slot, enter the UEFI environment and re-enter the command.

If none of the above methods work, please provide

using our

Online Support

possible.

Portal, include a description of the problem in as much detail as

UEFI

log. You can submit a support ticket