HighPoint SSD7540 Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol HighPoint SSD7540. HighPoint SSD7540 13 halaman. Using nvme raid aics with the dell precision 3930 rack workstation
Juga untuk HighPoint SSD7540: Panduan Instalasi Cepat (9 halaman), Panduan Instalasi (15 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi Cepat (11 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi Cepat (6 halaman), Menggunakan Manual (19 halaman)

SSD7540 Linux Debian10.6.0 Installation Guide

Press "CTRL+ALT+F2"(Install please press"ALT+F2") to switch to the shell on console

2, and the then execute following commands to copy the driver contents:

# modprobe vfat

# mkdir /hptdd

# mount /dev/sda1 /hptdd/

# cp -a /hptdd/hptdd /tmp/

# umount /hptdd

When the USB flash drive is unmounted, please unplug the USB flash drive from the

mainboard. And then execute following command to install driver to install the Linux

Debian.

# sh /tmp/hptdd/preinst.sh

Then press "ALT+F5" (Install please press"ALT+F1")to switch back to installation

screen and continue the installation as usual.

g. When the screen shows that" Finish the installtion ",

← Load vfat module

← Create mount point for USB flash drive

← Mount the USB flash drive to /hptdd

← Copy driver installation file to system temporary