HighPoint SSD7505 Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kandang HighPoint SSD7505. HighPoint SSD7505 15 halaman. Using nvme raid aics with the dell precision 3930 rack workstation
Juga untuk HighPoint SSD7505: Panduan Instalasi (14 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi Cepat (6 halaman), Panduan Instalasi Cepat (8 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (19 halaman), Menggunakan Manual (19 halaman)

Step 3 - Creating the RAID Array

a. This procedure assumes you have already installed NVMe SSD's into the SSD7000

controller (please see Step 1- Prerequisites).

Note: Make sure your USB flash drive has been formatted using the FAT32 file systems.

b. Insert the bootable USB flash drive into the motherboard and boot the system.

c. The motherboard's BIOS post screen should display information about the NVMe

SSD's:

d. Enter the motherboard's BIOS settings, and select the UEFI: "flash drive" from

the menu:

e. At the prompt, enter the following command to change the resolution:

mode 160 53