Emerson FB1100 Manual Penggantian Lapangan - Halaman 3

Jelajahi secara online atau unduh pdf Manual Penggantian Lapangan untuk Aksesori Emerson FB1100. Emerson FB1100 8 halaman. Flow computer coin cell battery field
Juga untuk Emerson FB1100: Manual Penggantian Bidang Papan Pemutusan Hubungan Kerja (18 halaman), Manual Penggantian (18 halaman), Manual Penggantian Lapangan (14 halaman), Manual Penggantian Lapangan (20 halaman), Manual Penggantian Lapangan (8 halaman), Manual Penggantian (8 halaman)

Halaman Cetak
Emerson FB1100 Manual Penggantian Lapangan
Removing/Replacing End Caps
The flow computer includes two threaded covers called end caps. The front end cap includes a
window for viewing the HMI module; the rear end cap provides access to the terminal plate for
power and I/O wiring.
You can replace the end cap in the field provided that the replacement is the identical end cap
type.
Restriction
Hazardous area approvals require that any part replaced in the field be the exact same part ("like for
like"). Upgrading or substituting different parts violates hazardous area certification.
Refer to the table below for the correct field replacement kit part number.
Item
Housing End Cap with Glass Window (Front Cover)
Housing End Cap without Glass Window (Rear Cover)
UL File Number for these kits: E192567
Ambient Temperature Range
May be used up to a maximum ambient temperature of 80˚C and a minimum ambient temperature
of –40˚C; refer to the data plate attached to the device for ambient temperature.
Required Tools
WARNING
EXPLOSION HAZARD –Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
WARNING
EXPLOSION HAZARD –Never remove end cap(s) in a hazardous location. Removing cover(s) in a
hazardous location could result in an explosion.
Important
If this equipment is used in a manner not specified by the manufacturer, the protection provided by
equipment may be impaired.
FB1100/FB1200 Flow Computer End Cap Field Replacement Guide
3mm hexagonal torque wrench. Range must include 10 to 12 in-lbs (1.1 to 1.4 N-m).
D301814X012
November 2020
UL Field Replacement Kit
Part Number
399122-01-0
399123016-KIT
1