Emerson FB1200 Manual Penggantian - Halaman 6

Jelajahi secara online atau unduh pdf Manual Penggantian untuk Aksesori Emerson FB1200. Emerson FB1200 18 halaman. Flow computer coin cell battery field
Juga untuk Emerson FB1200: Manual Penggantian Bidang Papan Pemutusan Hubungan Kerja (18 halaman), Manual Penggantian Lapangan (14 halaman), Manual Penggantian Lapangan (20 halaman), Manual Penggantian Lapangan (8 halaman), Manual Penggantian Lapangan (8 halaman), Manual Penggantian (8 halaman)

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide

D301820X012

November 2020

DANGER

EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.

Performing this operation in a hazardous area could result in an explosion.

DANGER

EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing cover(s) in a

hazardous location could result in an explosion.

Removing/Replacing the HMI Module

UL Listed Termination Board Field Installed Accessory Kit for Use in Class I, Division 1, Groups C,

D; Class I, Division 2, Groups A, B, C, and D



To replace the termination board, you first need to remove the battery enclosure/HMI module

assembly to gain access to the termination board screws on the inside of the flow computer.

Flow Computer Termination Board Field Installed Accessory Kit Part No. 399185-01-1 for

use with UL Listed Model Series FB1100.

Flow Computer Termination Board Field Installed Accessory Kit Part No. 400216010-KIT

for use with UL Listed Model Series FB1200.

Remove the front and rear end caps. Remove the retaining clamp on the front end cap (if

present) using a 3 mm hexagonal wrench.

Components of Retaining Clamp Assembly

Screw

Retaining Clamp

Washer

Grasp the end cap (front or rear).