HighSecLabs DK22H-3 Panduan Pengaturan Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Beralih HighSecLabs DK22H-3. HighSecLabs DK22H-3 12 halaman. Secure kvm switches
Juga untuk HighSecLabs DK22H-3: Panduan Instalasi Cepat (2 halaman), Panduan Pengaturan Cepat (12 halaman)
Halaman Cetak
SEC TIONS
Table of Contents
InSTallaTIon
Installing the KVM
General
• Verify that all peripherals and computers are turned off prior to
connecting them to the product.
• The KVM's back panel is divided into Console Ports and Computer
Ports sections.
– Connect peripherals which are due to be shared by the KVM
to the Console ports.
– Connect each computer that requires access to the shared
peripherals to a Computer port group.
– Make sure that every computer is connected to a separate
Computer port group.
– Computer port group numbers are represented by push
buttons on the product's front panel.
– Switch peripherals between computers by pressing the push
buttons on the product's front panel.
Step 1 – Connect peripherals to the KVM Console ports:
• Keyboard: Connect either a USb or PS/2 keyboard to the
corresponding KVM console keyboard port.
• Video: Connect the monitor cable to the KVM console video port.
HSL Mini-Matrix Quick Setup Guide
1
2
• Mouse: Connect either a USb or PS/2 mouse to the corresponding
KVM console mouse port.
• Audio peripherals: Connect headphones / speakers to the KVM
console audio-out port.
• USB peripherals: Connect USb peripherals to the KVM console
fUSb port.
Note: authentication devices such as smartcard and biometric readers are
enabled by default, other devices must be explicitly whitelisted – for further
information please refer to the KVM administrator's guide.
Smart-Card
Reader
Audio
fUSB Cable
Audio Cable
Mouse Cable
Display Cable
Keyboard Cable
3
Display
Keyboard
Mouse
CONSOLE PORTS
COMPUTER/SOURCE PORTS
Computers
3