HighSecLabs FV11D-M Panduan Pengaturan Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Beralih HighSecLabs FV11D-M. HighSecLabs FV11D-M 8 halaman. Secure isolators

Table of Contents

SECTIONS

OPERATION

Before using the Isolator, run a one-time EDID capture. This

prevents the continuous transfer of potentially malicious data -

from the display to the PC – that could infect the PC, cause data

leakage, and so on.

Preparation:

•

Connect the PC and all peripherals to the unit, according to

the diagram.

•

Make sure the PC, display, and unit are ON.

To run an EDID capture:

On the PC SIDE, short-click the CAPTURE button – for less

than one second. Warning: Long-clicking the CAPTURE

button sends the unit into an undesired loop. If this

happens, restart the unit and repeat the procedure.

At first, the EDID LED flickers for a few seconds and then

lights continuously.

Note: If the EDID LED is OFF, check the connections and

that the display is powered ON. Then, repeat the

procedure.

Restart the unit.

HSL Secure 2-Port KVM Combiner Quick Setup Guide

Note: An EDID capture needs to be performed for new installations and

when changing a display.