HighSecLabs SC21H-3 Panduan Pengaturan Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Beralih HighSecLabs SC21H-3. HighSecLabs SC21H-3 17 halaman. Secure 2-port kvm combiner
Juga untuk HighSecLabs SC21H-3: Panduan Instalasi Cepat (2 halaman)
Halaman Cetak
Table of Contents
SECTIONS
INSTALLATION
Step 2 - Power ON the Combiner
1.
Turn ON both PCs.
2.
Connect the power supply and power ON the
Combiner. The Combiner boots up, as follows:
•
If you are using the Combiner for the first
time, the default display mode is picture-in-
picture (PiP).
•
Otherwise, the Combiner boots into the
display mode used during the previous
power on, including either:
−
Full-screen - either channel #1 only
or channel #2 only
−
Picture-in-picture (PiP)
−
Side-by-side
−
Custom mode
Note: In case no picture is presented after powering on the Combiner,
connect an alternate display to the combiner's display console port, or
perform a reset to factory default.
HSL Secure 2-Port KVM Combiner Quick Setup Guide
1
2
3
5