Gallien-Krueger 400RB-IV series Panduan Pemilik - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Gallien-Krueger 400RB-IV series. Gallien-Krueger 400RB-IV series 16 halaman. Artist series
Halaman Cetak
Installation and Maintenance
.
Installation:
·
To insure proper operation and to avoid
potential safety hazards, place the unit on a
firm, level surface. When installing the unit
in a rack, be sure the mounting hardware can
support the amplifier's weight. To save space
in your rack, the 400RB-IV's feet can be
.
removed using a Philips head screw driver.
Make certain that proper space is provided for
ventilation. The 400RB-IV Series
requires at least ½ inch clearance above for
proper ventilation. Never block the fan vent
holes in the top or front of the amplifier. If
the amplifier will be installed in a rack or
other enclosed area, make sure that there is
sufficient air movement within the enclosure
to allow proper cooling. Consult your dealer
.
for more information.
Avoid installation in extremely hot or cold
locations, and areas that are exposed to direct
.
sunlight, or near heating equipment.
.
·
Avoid moist or humid locations.
·
Remember, power amplifiers generate heat.
The heat sink fins and ventilation slots that
form part of the enclosure are specially
designed to remove this heat. Placing other
electronic equipment near these heat-
dissipation systems may possibly affect the
long-term reliability of both your amplifier
and the other equipment.
Moving the Unit:
Before moving the unit, be certain to disconnect any
interconnection cords with other components, and make
sure that you disconnect the unit from the AC outlet.
400RB-IV Series
Cleaning:
When the unit gets dirty, clean only with a dry cloth.
Never use benzene, thinner, alcohol, or other volatile
cleaning agents. Do not use abrasive cleaners, as
they may damage the finish of metal parts. Avoid
spraying insecticides near the unit.
Maintenance:
Your new amplifier is rugged. It was built to give you
a lifetime of trouble-free operation, if it is operated in
accordance with the instructions contained in this
manual. The only maintenance required is cleaning.
If you are going to move your amplifier around
frequently, we recommend a road case to protect it
from scratches and road wear.
9