DDMALL HEV-2KW Manual - Halaman 18
Jelajahi secara online atau unduh pdf Manual untuk Konverter Media DDMALL HEV-2KW. DDMALL HEV-2KW 20 halaman. Mini wireless hdmi encoder
Halaman Cetake) If you have set a new password but you forget it, you can press the button about
15s to restore to factory settings.
f) Lower bitrates require less bandwidth and may allow for a more stable stream while
higher bitrates offer better video quality, but require more network bandwidth. So
please set the parameters according to your practical network environment.
FAQ
9.
1. How can I find the IP address that STA used last time?
You can login to the WEB UI by the default IP address in AP WI-FI mode so that you
can see the IP address STA used last time in the Network configuration interface.
2. Cannot connect to HEV-2KW Hotspot?
Please make sure the encoder has been powered on normally and check HEV-2KW's
indicator is displayed as yellow light which indicates AP WIFI mode. If not, hold down
the button about 3s to switch the WIFI working mode as AP mode so that you can
search the Network Name "HEV-2KW" and enter the correct password as "12345678".
3. Can the HEV-2KW be powered directly from the HDMI sources?
HEV-2KW has been built in advanced low-power features so it can be directly
powered from most HDMI source such as PC, Media Player, etc. While for some
devices with low-power HDMI port, please use the included USB cable to power on
HEV-2KW.
4. How can I get information about the latest firmware?
For the latest firmware of HEV-2KW, please login to forum.ddmalltech.com to get
more information about it. It is also recommended for you to leave your contact
18