Gallien-Krueger MB 800 Panduan Pemilik - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Gallien-Krueger MB 800. Gallien-Krueger MB 800 11 halaman. Mb series
Juga untuk Gallien-Krueger MB 800: Panduan Pemilik (11 halaman)
Sound Tips
The MB 800 has several unique features which, if
used properly, will help you obtain the sound you
have been searching for.
Discreet Preamp: The MB800 features a
completely discreet FET (field effect transistor)
driven preamp. The same FET technology used to
create the legendary boost (G.I.V.E.) circuit found
in all GK amplifiers for over 30 years is used in
every stage of the MB800 preamp. Using FET
devices with the gate biased in a way that
emphasizes the optimum harmonic content of the
signal to drive the GK four band active EQ,
Contour and Gain allows the MB800 to transition
seamlessly from a full, warm, clean tone to full on
GK growl.
The Equalizer: The Equalizer is used to fine tune
your sound. When adjusting making adjustments,
do it just a little at a time. These are active circuits
and small changes can make a big difference in
your sound. With a little experimentation you will
find that this equalizer is very easy to use and
provides you with a large variety of great sounds
unique to GK.
Contour: Increasing the Contour level will scoop
out midrange frequencies while boosting the highs
and lows. The sound, once again, is unique to GK
and available on any other bass amp. Lower
contour settings are recommended for midrange
clarity at higher playing levels.
Gain B/ Level B: Turning up the Gain B control
will add a little growl to your tone by adding a
small amount of ever order harmonic distortion.
This is an unmistakable GK trade mark sound that
you will surely grow to appreciate. Raising the
Boost while lowering Level B will add more growl
while keeping the sound level the same. You can
use Level B to increase or lower the overall output
volume when switching the Gain B on via the front
panel or from the included foot switch. With either
MB 800
Gain A or Gain B, the cleanest sound is obtained
with master volume settings at approximately 3
o'clock.
Direct Out: The MB Series provides a low noise,
high quality balanced direct output for connection
to PA and recording consoles. With the Pre/Post
EQ switch set to "Pre" (Out), the direct output
signal is fed directly from the input stage providing
a low noise output superior to external direct boxes
and impedance transformers. In the "Pre" position,
the direct output signal is only effected by the Input
Volume, -10db Pad and Mute. This allows you to
adjust your tone and volume on stage without
changing the Direct Output signal level and
confusing your sound man. Changing the Pre/Post
EQ switch to "Post" (in), sends the "GK Sound"
(EQ settings etc.) and preamp response to the
Direct Out jack. This gives you complete control
over the Direct Out's tone and volume.
Limiter: When the limiter is engaged it prevents
the power amp from distorting. It is recommended
that this feature is used during high volume
situations.
8