Gallien-Krueger MB FUSION Panduan Pemilik - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Gallien-Krueger MB FUSION. Gallien-Krueger MB FUSION 12 halaman.
Halaman Cetak
Installation: To insure proper operation and to
avoid potential safety hazards, place the unit on a
firm, level surface.
Ventilation: Make certain that proper space is
provided for ventilation. Never block the fan vent
holes located on the sides of the amplifier. If the
amplifier will be installed in a rack or other
enclosed area, make sure that there is sufficient air
movement within the enclosure to allow proper
cooling. Consult your dealer for more information.
Avoid installation in extremely hot or cold
locations, and areas that are exposed to direct
sunlight, or near heating equipment. Avoid moist
or humid locations.
Remember, power amplifiers generate heat. The
ventilation slots on the enclosure are specifically
designed to remove this heat. Blocking or placing
other
electronic
equipment
dissipation system may possibly affect the long
term reliability of both your amplifier and the
other equipment.
MB FUSION
Moving the Unit: Before moving the unit, be
certain to disconnect any interconnection cords
with other components, and make sure that you
disconnect the unit from the AC outlet.
Cleaning: When the unit gets dirty, clean only
with a dry cloth. Never use benzene, thinner, alco-
hol, or other volatile cleaning agents. Do not use
abrasive cleaners, as they may damage the finish
of metal parts. Avoid spraying insecticides near
the unit.
Maintenance: Your new amplifier is rugged. It
was built to give you a lifetime of trouble free
operation, if it is operated in accordance with the
instructions contained in this manual. The only
maintenance required is cleaning and the occa-
sional tube replacement If you are going to move
your amplifier around frequently, we recommend
near
the
heat
a road case to protect it from scratches and road
wear.
Packaging: The carton and packing materials used in
shipping your new amplifier were specifically
designed to cushion it from the shocks and vibration
that occur during transport. We suggest that you
save the carton and packing materials for use in ship-
ping, in the event you move, or the amplifier needs
repair.
10