HighSecLabs SK41PU-N Panduan Instalasi Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Beralih HighSecLabs SK41PU-N. HighSecLabs SK41PU-N 2 halaman. 2/4/8 ports single-head kvm switches
Juga untuk HighSecLabs SK41PU-N: Panduan Pengaturan Cepat (15 halaman), Panduan Pengaturan Cepat (15 halaman)
Halaman Cetak
Supported Hardware
The KVM switches support most standard speakers, headsets,
microphones and USB keyboards and mice.
Environmental
• Operating temperature is 32° to 104° F (0° to 40° C).
• Storage temperature is -4° to 140° F (-20° to 60° C).
• Humidity requirements are 0-80% relative humidity,
non-condensing.
Safety and Regulatory Statements
Safety Symbols
One or more of the following symbols may be included in your
product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to
the presence of important operating and maintenance
(servicing) instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the
user to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off
switch is in the on position.
Power Off: This symbol indicates the principal on/off
switch is in the off position.
Protective Grounding Terminal: This symbol indicates a
terminal which must be connected to earth ground prior
to making any other connections to the equipment.
©2017 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only.
SK21D/P/H-N • SK41DU/PU/HU-N • SK81DU/PU/HU-N
SK21x-N Dimensions
177 (W) x 82 (D) x 35 (H) mm, Weight: 0.52 kg
SK41xU-N Dimensions
342 (W) x 148 (D) x 42 (H) mm, Weight: 1.6 kg
SK81x/xU-N Dimensions
440 (W) x 192 (D) x 44 (H) mm, Weight: 2.6 kg
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible damage
to equipment, please observe the following precautions.
• Do not disable the power grounding plug. The grounding plug
is an important safety feature.
• Plug the power cord into a grounded (earthed) outlet that is
easily accessible at all times.
• Disconnect the power from the product by unplugging the power
cord from either the electrical outlet or the product. The AC inlet
is the main disconnect for removing power to this product. For
products that have more than one AC inlet, to remove power
completely, all AC line cords must be disconnected.
• This product has no serviceable parts inside the product
enclosure. Do not open or remove product cover.
CAUTION: Some HSL products contain a lithium battery. This battery is not
a field replaceable item, and replacement should not be attempted by a
user. If errors occur when using the product and the battery is suspected,
contact HSL Technical Support.
WARNING: For Service Personnel Only - There is a risk of explosion if
the battery is replaced with an incorrect type. Dispose of used batteries
according to the manufacturer's instructions.
This product is for use with other products that are Listed or
Certified by a Nationally Recognized Testing Laboratory (NRTL).
| QUICK INSTALLATION GUIDE
HDC14845 Rev. 1.0