AFL FLX380 Panduan Referensi Cepat - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Peralatan Uji AFL FLX380. AFL FLX380 16 halaman.
Juga untuk AFL FLX380: Panduan Referensi Cepat (18 halaman)

Halaman Cetak

FTTx PON Power Meter

In the FTTx – In Service mode, available only in the FLX380-103, the first page displays

received FTTx PON power at 1490 and 1550 nm. On dark fibers users can test at

1310/1550 nm. On live fibers users can test only at 1625 nm. To see OTDR settings, press the

[

OTDR] key. To return to the PON power meter page, press the [Power Meter

To transfer files from your FLX380 to a PC using a USB cable, perform the following:

1 Connect your FLX380 to a PC using the supplied type A to Mini USB cable. Make sure the

mini-plug is fully seated in your FLX380.

2 Press the [USB] soft key on the FLX380's Main Menu.

3 From your PC desktop, open My Computer. A new removable drive named [OFL X:] will

appear, where 'X:' is the drive letter assigned to your FLX380 by the PC.

4 Under [OFL X:] you should see two folders: [RESULTS] and [SOFTWARE]. Copy the [RESULTS]

folder to your PC.

6 Under [RESULTS] you will see: [TRACES]. Under [TRACES] you will see all of the folders

containing OTDR traces or OPM results.

Note: Before removing the USB cable connecting your FLX380 to your PC, or pressing

the [Cancel] soft key on the USB page, left click the Safely Remove Hardware icon in the

Start bar of your PC, then left click the Safely remove USB mass storage device – Drive (X:)

message, where 'X' is the drive letter assigned to your FLX380.

For detailed operating instructions, refer to the FLX380 User's Guide (available on supplied

CD and www.AFLglobal.com).

Transferring Files to a PC

(FLX380-103 model only!)

] key.