HighSecLabs Corona Tag Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Kantor HighSecLabs Corona Tag. HighSecLabs Corona Tag 8 halaman. Social distance monitoring employee badge
Halaman Cetak
Default Behaviour
The HSL Employee Monitoring Budge (EMB-1) is shipping
configured and ready to go with the following parameters
already set:
Encounter maximal distance – about 6ft. This
•
approximated parameter is calculated by the BT
signal intensity of two badges. Any encounter with a
distance greater than 6ft will not be logged.
Motion wakeup time – EMB-1 is equipment with a
•
motion detector and when moved will become
active (both publishing and scanning) for 60
minutes. After 60 minutes of inactivity EMB-1 will
hibernate until moved again.
Hours of Operation – daily hours in which the tag
•
will be on regardless of motion. By default, off.
Time Zone – By default UTC, can be synched with
•
the configuration PC.
Session Time – Minimal time for an encounter to be
•
logged. By default, 15 minutes, can be configured
using the configuration tool.
Timeout – Maximal time of a timeout during an
•
encounter for it to have continuity. By default, 4
minutes.
Corona Tag | USER MANUAL
Every night at 12 am all events will be compressed and the
total time of encounters will be logged, as long as, at least one
of the encounters is longer than 15 minutes.
5