Copytrax DaVinci pro 6 photo Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Duplikator Disk Copytrax DaVinci pro 6 photo. Copytrax DaVinci pro 6 photo 15 halaman. High resolution inkjet printer for cd and paper
Halaman CetakDaVinci Pro CD printer.
Connection and software installation .(Windows)
1.
Connection
Connect the USB cable to your PC. (Or
parallel cable if required). If you have the
choice we recommend you use the USB cable.
Connect the mains plug to the mains supply.
If the printer comes on when you plug in the
mains cable
on/off button.
2. Installing the printer driver.
After connecting the printer and PC you need
to install the printer driver from the CD
marked 'Epson stylus photo 1290 Printer
Software'.
A. Make sure that printer is off, then turn on
On/Off
your computer. Turn off any virus protection
software and cancel any set-up wizard or the
'New hardware found' window if it has
opened.
B. Insert the printer software CD. If the
Installer dialog box does not appear click on
'my computer', click on the CD rom icon, then
click 'open'. Then double-click on
EPsetup.exe.
C. Select Install Printer Driver/Utility, and
click
. Then click OK in the dialog box that
appears.
D. Follow the onscreen instructions to turn on
the printer. The printer port configuration
starts automatically for widows Me and 98
users and for printers connected via a USB
cable.
E. When a message appears asking you to
restart your computer, do so.
For windows 2000 users using a parallel
cable, click the 'stop search' button when the
USB device driver starts. Then follow the
onscreen instructions.
F. After restarting your PC and turning on the
printer the 'Set-up utility' opens
automatically. Follow the onscreen
instructions to install the ink cartridges or
refer to the next section 'Installing the ink
cartridges'.
.
turn it OFF
by pressing the