Gallo Acoustics DROPLET Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pembicara Gallo Acoustics DROPLET. Gallo Acoustics DROPLET 4 halaman.

DROPLET INSTALLATION STEPS

Carefully unpack and check the components.

Select a suitable location for installation

of the Gallo DROPLET loudspeaker, taking

time to consider access for cable installation

within the ceiling cavity and applicable

building regulations. You should also be sure

that the ceiling can support the weight of

the DROPLET loudspeaker.

The DROPLET loudspeaker is designed to

connect to speaker cable that has been

installed within the ceiling cavity. The

speaker cable should be lead to your

selected location, exiting the ceiling via a

small hole.

Affix the ceiling plate to the ceiling, leading

the speaker cable from the cavity through

the large cable hole on the ceiling plate.

Be sure to use fixings appropriate to the

ceiling type, taking into consideration the

weight if the DROPLET speakers.

Slide the ceiling rose and cable grip onto the

DROPLET cable

Wrap the DROPLET cable around the cable

grip tabs on the ceiling plate, routing

towards the tension clamp. Before securing

the tension clamp in place, check that the

DROPLET speaker is at the desired height.

Trim any excess DROPLET speaker cable,

then connect to one side of the supplied ter-

minal block, before connecting the speaker

cable from the cavity to the other side.

Slide the ceiling rose up into position and

secure with the two small screws supplied,

before screwing the external cable cable

grip in place.