Gallo Tech GStarter I Panduan Pengoperasian & Pemasangan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Pemasangan untuk Starter Jarak Jauh Gallo Tech GStarter I. Gallo Tech GStarter I 12 halaman. Push button start & alarm system with 2 remote key fobs

Halaman Cetak

c.) Lock only by remote:



When the ignition key is ON, pressing

disarmed mode.

Siren Button: Car-Locating/Anti-hijack

a.) Car Locating



When the system is armed, holding this button for more than 2 seconds, the siren will chirp and the

parking lights will flash five times.

b.) Anti-Hijack:



When the ignition key is in the ON position and the system is disarmed, holding this button for over

2 seconds, the parking lights will flash twice.



After 40 seconds, the siren will chirp (non-continuously) for 20 seconds. After the 20 seconds, the

siren will chirp louder (continuously) and the parking lights will flash for another 60 seconds. After the

60 seconds of siren and lights flashing the system will be in the armed mode, and the starter will be

disabled.



Pressing the

1.3

The

has numerous user configurable features that can be enabled or modified

according to user's preferences. This section explains each of the user configurable

functions. See section 1.4 Programming Function Set-Up Options for details on how to

modify configurable features. When installing as a stand alone "Engine Start" configuration

(without door lock & alarm functions) the only

those marked with an (*).

Valet Mode: If Valet Mode is set to ENABLE, pressing

triggers will be disabled. The Green L.E.D. on the Engine Start button will flash for 10 seconds when the ignition is

turned from OFF to ON, or ON to OFF.

Transmitter (Key FOB) Code learning: The Key FOBs must be learned by the module before they will function.

Passive Arming: If Passive Arming is set to ENABLE, the system will automatically arm itself (without locking) 30

seconds after the ignition is turned OFF and a door is opened and then all doors are closed.

Passive Locking: If Passive Locking is set to ENABLE, the system will automatically lock itself (without arming)

30 seconds after the ignition is turned OFF if a door is opened, and then all doors are closed. If Passive Arming

AND Passive Locking are set to ENABLE, the system will automatically arm and lock the doors 30 seconds after

the ignition is turned OFF and a door is opened and then all doors are closed. Note: This function could result in

the keys/FOB being locked in the vehicle. Use caution when selecting this function.

Locking Time: When pressing

be set at either 0.4 seconds or 4 seconds. Most cars will function properly when this option is set to the factory

default of 0.4 seconds.

Ignition Key door Locking/ Unlocking: When this option is set to ENABLE the doors will automatically unlock

when the ignition key is turned off and the doors will lock when the foot brake is depressed. This function will not

activate if a door is open when the ignition key is cycled OFF/ON.

Active Arm & Lock: If this option is set to ENABLE, the system will automatically rearm and relock itself within 30

seconds after the system is disarmed by pressing

ON.

Gallo

button will deactivate the Anti-hijacking mode.

FUNCTION OPTIONS

the electrical pulse sent to the door locking/unlocking mechanism can

will lock the doors and the system will remain in the

functions that can be used are

will lock/ unlock the doors only. All alarm

, if the door is not opened or the ignition key is not turned

- 4 -

52008