GALLUNOPTIMAL GOLRS100A Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Scrubber GALLUNOPTIMAL GOLRS100A. GALLUNOPTIMAL GOLRS100A 20 halaman. Fume extractor

2.5. Operation Instruction

WARNING: The suction system must be placed horizontally. Failure to do so

may result in damage.

1. Open the cover and check if all filters are included. If not, all 3 filters

must be inserted. Then close the cover.

2. Mount the suction arm on the filter unit and position it according to

your application.

The higher the bending radius of the suction arm, the higher the suction

power.

Avoid drafts. This could impair the suction effect.

Set suction power regulator to OFF

3. Connect the filter unit to a 230 V socket via the mains cable and

switch it on at the mains switch.

4. The air flow should be adjusted according to the actual demand. It

should not be too high or too low. Excessive airflow increases power

consumption and noise level.

If the filter system is not used for a longer period of time, it should be

switched off and the power cord should be unplugged.

USER MANUAL