Cor HA-6400 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Otomatisasi Rumah Cor HA-6400. Cor HA-6400 10 halaman. Setup using the tp-link router

Step 1 — Connect Power to the Côr panel

S Connect power to the back of the panel using the transformer adapter

Tip: Order an extra transformer adapter (part number ZW−PS9V) that can be used for the setup and leave the one in the package intact.

Step 2 — Connect the TP−Link router to the Côr panel

S Connect power to the TP−Link router that will be included with the Smart Starter Kit

S Remove the sticker covering the four Yellow ports on the TP−Link router and connect an Ethernet cable to one of the ports

S Connect the Ethernet cable from the TP−Link router to the Ethernet port on the back of the Côr panel

Step 3 — Establish a network connection to the panel for firmware update

S Connect the Ethernet cable from your primary router to the main Blue port on the TP−Link router (the 'ring globe' light on the front

right side of the TP−Link router should be illuminated)

S Confirm the Côr panel is using Ethernet (and not Wi−Fi)

S If panel says, "Press 7 to switch to Ethernet" then Press 7, otherwise proceed to verify the IP address

If the Côr panel announces "IP is not ready", check your network connection.

NOTE: If the "ring globe' light on the front right side of the TP−Link router is not illuminated but an IP address is provided by the Côr

panel, confirm the primary router connection is not on a firewall network.

Step 4 — Provision the Côr panel on the UltraSync Dealer Portal

S Launch your web browser and login to

S Click on the + "plus" icon next to the Search field at the top to add a New Site and enter the requested information to provision the

panel to the customer

S Account Number = Any 4 Digit number

S SSID = Serial Number on the sticker back of the Côr Panel

S Make sure to select "US IP" under the Service Grade drop down menu at the end

S Click Create when finished

Step 5 — Update the Côr panel with the latest Firmware

S On the UltraSync Dealer Portal, click on the 3 line "hamburger" icon for the Dashboard menu at the top left corner of the screen

S When the menu expands on the left side of the screen, click on Operational Status to display all the panels on your portal

S Locate the panel provisioned in Step 4 and click on the Retrieve Live Status "Globe" icon to the right

https://webportal.ultra−sync.com