CORA CS1000 Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori CORA CS1000. CORA CS1000 17 halaman.
Halaman Cetak
Replacing the Batteries
1.
Remove the housing screw using a
small Phillips screwdriver.
2.
Push the sensor body upwards and gently remove the sensor by pulling outwards.
3.
Remove old batteries and dispose of in accordance
with your local regulations.
4.
Install two new AAA batteries.
Note: Do not mix old and new batteries!
5.
Reassemble the sensor and tighten the screw.
CS1000 Long Range Door Sensor – User Guide
Page 11