CORA CS1010-CL-US9HT-00 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori CORA CS1010-CL-US9HT-00. CORA CS1010-CL-US9HT-00 15 halaman. Long range leak sensor
Halaman Cetak
Figure 3 – Performing Network or Factory Reset on the Leak Sensor
Holding the button will perform a network or factory reset:
Network Reset
release. The device will reset all LoRaWAN Settings, which does not affect device
operation or configuration. Following reboot, a reset event uplink (confirmed) will be
sent upon rejoining the LoRaWAN network.
Factory Reset
device will reset all parameters to factory defaults. Following reboot, a Factory Reset
event uplink (confirmed) will be sent upon rejoining the LoRaWAN network.
CS1010 Long Range Leak Sensor – User Guide
– Press and hold the SET button for 10 seconds, but less than 25, then
– Press and hold the SET button for > 25 seconds, then release. The
Page 5