Dynex DX-WD1335 Manual Petunjuk Perakitan - Halaman 11

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Adaptor Dynex DX-WD1335. Dynex DX-WD1335 16 halaman. Meuble en bois pour téléviseur
Juga untuk Dynex DX-WD1335: Manual (6 halaman), Petunjuk Perakitan Manual (Bahasa Inggris) (16 halaman), (Prancis) Petunjuk Manual Montase (16 halaman)

DX-WD1335

Step 6:

Caution: Check the parts carefully before assembling. Disassembly of glued parts is extremely difficult.

Fill the holes in the stop molding (J) 1/4 to 1/2 full with glue (R), then insert the wood dowels (P) into the holes.

Wipe away the excess glue.

Drop a few beads of glue (R) into the holes in the ends (A and B).

Align the ends (A and B) and the back (E) with the top (C) and the stop molding (J). Make sure that the dowels,

Twist-lock

fasteners, and cam dowels align with the correct holes, then tighten the four hidden cams and two

Twist-lock

fasteners.

Note: Wipe away the excess glue with a damp cloth.

To use a Twist-lock®

fastener:

Insert the dowel end

of the fastener into the

hole of the adjoining

part.

Note: The dowel end of

the fastener must

remain fully inserted

in the hole of the

adjoining part while

locking the fastener.

Tighten the fastener

with a Phillips

screwdriver as tight as

possible.

Maximum: 210°

Minimum:

190°

Dowel end

Arrow

Need help? Call 800-305-2204

You'll need:

P (2)

R (1)

Fill the holes 1/4 to

1/2 full with glue.

Phillips screwdriver