Dynex 32" LED-LCD TV DX-32E150A11 Panduan Pengaturan Cepat

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk TV Dynex 32" LED-LCD TV DX-32E150A11. Dynex 32" LED-LCD TV DX-32E150A11 2 halaman. Téléviseur acl à del de 32 po
Juga untuk Dynex 32" LED-LCD TV DX-32E150A11: (Panduan Pemasangan Cepat) (2 halaman), (Prancis) Manual D'installation Rapide (2 halaman)

Halaman Cetak

FINAL

FOR PRINT

DX-32E150A11_10-1326_QSG_V3_EN.eps

12/15/2010

3:31:14 PM

32" LED-LCD TV

QUICK SETUP GUIDE

DX-32E150A11

Remote control

AC power cord

Composite cable

and

2 AAA batteries

TV stand and 8 screws

(M4 screws: 4, M6 screws: 4)

Quick Setup Guide

WE ARE GOING GREEN!

A copy of the manual is not provided in the box

but is available at www.dynexproducts.com

Click Service & Support, enter your model number in

the Product Search field, then click Search.

Front features

Remote control

sensor

Power indicator

Volume

Power button

+/-

Input

Channel

+/-

Installing the stand

1 Remove the stand, stand column, and screws from the box.

2 Align the holes in the stand with the holes on the stand column, then secure the

stand to the column with the longer screws (M4) provided.

Screws holes

Narrower portion

of the stand

Wider portion

of the stand

Longer (M4)

screws

THIS SIDE FRONT

3 Lay a soft, dry, and lint-free cloth on a table and place the TV face down on the

cloth. Insert the stand column into the TV and secure it with the four stand

column screws (M6).

Important: The wide portion of the stand should go towards the front of the TV.

Cloth or padding

Shorter (M6) screws

THIS SIDE FRONT

To remove the stand from the TV, perform these steps in reverse order.

Installing a wall-mount bracket

If you want to attach the TV to a wall-mount bracket (not provided), you should first

remove the stand pedestal if it is pre-attached.

To remove the stand column:

1 Lay your TV face down on a table or bench. Make sure that you put down a soft

cushion or cloth so that your TV is not scratched.

2 Remove the four screws holding the stand column to your TV, then remove the

stand and the stand column.

To attach your TV to a wall-mount bracket:

1 Remove the three screws holding the TV to its base, as previously described.

2 Secure the wall-mount bracket to the back of your TV using the fourM6 screws

provided with the bracket.

Connecting a DVD or Blu-ray DVD player, cable

box, satellite receiver or game station

Using HDMI (best)

Side of TV

HDMI cable

HDMI device

Using component (better)

Back of TV

Component video device

Component

video cable

Audio cable

Note: Cable connectors and jacks are often color-coded. Match the colors when

you connect the AV cable.

Connecting an antenna

Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back of

your TV and the RF OUT jack on the antenna.

Back of TV

75-Ohm coaxial cable

Antenna, cable TV,

or satellite RF jack

Connecting a VCR, camcorder, or game

(good)

Back of TV

Back of VCR

LINE

OUT

Composite

cable

Back of camcorder

or game

Note: Cable connectors and jacks are often color-coded, however this TV is

slightly different. Match the colors of the Audio L/R cables to the red and white

jacks on the TV and the audio source, but connect the video cable (with the

yellow connector) to the green "Y" jack on the TV and to the yellow VIDEO OUT

jack on the video source.

Connecting to a computer

Back of TV

Computer

Audio cable (stereo mini plugs)

RGB (VGA) cable

Connecting headphones

Side of TV

Connecting a digital audio amplifier

Back of TV

Optical audio cable

Connecting power

Connect the power cable to a power outlet.

Back of TV

Power cord

Power outlet

Setting up your remote control

1 While pressing the release button on the

battery compartment cover on the back

of the remote, lift the cover off the remote.

2 Insert two AAA batteries into the battery

compartment. Make sure that the + and -

symbols on the batteries align with the

+ and – symbols in the battery compartment.

3 Replace the cover.