HIGOAL Socket Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori HIGOAL Socket. HIGOAL Socket 2 halaman. Smart operation system

Please make sure you connect the smart socket to

a regulated socket.

White LED: Factory mode | Blue LED: output off

Green LED: output on

Scanning Instruction:

make sure that the LED is white, if not refer to "Reset" guide on

page 4. Press the on-off button for 4 seconds, until you see a

green LED blink slowly, then release.

Now the socket is ready to be scanned using the APP.

Tip:

short press on the on-off button, will cancel the scan mode.

Open the settings menu using the logo on top

right corner, select the first option "SCAN".

Proceed according to the instructions.

The app will start to scan the socket to the wifi,

at any time you can use the "CANCEL" button

to stop.

At the end of successful scan, you will redirected

to the Devices page, the newly added socket will

have a green frame.

Tip:

We recommend to set a name for the socket.