Coral UVCGY1 Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pengering Coral UVCGY1. Coral UVCGY1 18 halaman. Coral uv sanitizer and dryer

Halaman Cetak
Operation Modes
There are four separate operating modes. Drying results may vary depending on how well you shake
off the items, general humidity conditions, and the shape of the objects that are being sanitized and/or
dried.
For optimal results, insert items into the chamber according to the instructions in
Chamber.
Button
Function
This setting dries the
AUTO
contents for a specified
amount of time followed by
10 minutes of sanitization.
This setting is
recommended for wet
items that need to be dried
and sanitized.
This setting runs the UV
SANITIZE
lights only. It is
recommended for items
that cannot be washed or
that don't need to be
dried.
This setting will dry items,
DRY
but will not sanitize them.
It is recommended for
items that are washed but
do not need sanitization.
DO NOT DRY
ELECTRONICS.
This setting runs a
STORAGE
50 minute AUTO cycle. It
will then run a 2 minute
sanitization cycle every
2 hours (to a maximum of
24 hours).
This setting is
recommended to keep
items sanitized overnight.
To stop operation if the product is running, press the same function button.
To stop operation if the product is not yet running (but a function button is blinking), press any other
function button.
To reset operation when selecting the cycle time (and the time display is blinking), press any other
function button.
In all modes of operation, the Coral UV Sanitizer and Dryer will beep when the cycle is complete.
If at any time during operation the Press button on the front of the product is pushed, the top lid will
IMPORTANT
open and operation will immediately stop.
Range (minutes)
• 40 (30 dry, 10 UV)
• 50 (40 dry, 10 UV)
• 60 (50 dry, 10 UV)
• 70 (60 dry, 10 UV)
10, 15, 20
30, 40, 50, 60
• 50 minutes AUTO
• 2 minutes every
2 hours (up to 24 hrs)
Inserting Items in the
Instructions
1. Ensure the lid is securely closed.
2. Press the AUTO button.
The button and the number of minutes will blink
in the display.
3. Continue pressing the AUTO button until you
reach the desired number of minutes.
4. Stop pressing the button and wait for the timer
to stop blinking.
Operation will start and run for the specified
time.
1. Ensure the lid is securely closed.
2. Press the SANITIZE button.
The button and the number of minutes will blink
in the time display.
3. Continue pressing the SANITIZE button until you
reach the desired number of minutes.
4. Stop pressing the button to start operation.
1. Ensure the lid is securely closed.
2. Press the DRY button.
The number of minutes will blink in the display.
3. Continue pressing the DRY button until you
reach the desired number of minutes.
4. Stop pressing the button to start operation.
1. Ensure the lid is securely closed.
2. Press the STORAGE button.
50 minutes will appear in the time display and
the product will start.
Coral UV Sanitizer and Dryer
9