Adesso Bergen 4209-01 Instruksi Perakitan

Jelajahi secara online atau unduh pdf Instruksi Perakitan untuk Pencahayaan Rumah Adesso Bergen 4209-01. Adesso Bergen 4209-01 2 halaman. Arc lamp

Halaman Cetak

Please visit our website or scan QR code to

view a Video on assembling our patent

pending No Tools Arms

PARTS DIAGRAM:

(2)* HEX screw (G)

(1)* Allen Wrench (F)

(1) * Wrench (P)

Assembly Instructions (English)

ASSEMBLY INSTRUCTION FOR

Bergen Arc Lamp

Model# 4209-01

Please begin assembly by laying all parts down on the ground. The

arms are easiest to assemble if you assemble them first, before they

are attached to the lamp body.

1. Assemble arc arms (A) ,(C) and (E) by placing the top arc tube into

the bottom arc tube and securing each arm by tightening each metal

collar joint (B). Simply slide joint (B) over the threaded tube and

screw down to tighen. If you have trouble here, slightly lift up the

upper arm to relieve the tension on the joint while screwing the parts

together.

Attention: Be sure to align the consistency of the curve on the arm.

Do not tighten the metal collar joints all the way yet. This way, when

you set the arms onto the base later, you can get the arm curves

perfect and then tighten the joints.

2. Place the curved tube (E) onto tube (H), then tighten it using 2 *

hex screw pieces (G) with allen wrench (F).

is facing the same direction as the switch when tightening the

screw.

3. Screw tube (H), (I) and (J) together until tight.

4. Remove the bushing (L) from the base and throw away.

5. Insert tube (J) into accent (K), base (M) & washer (N), then tighten

it with nut (O) using wrench (P) from the bottom of the base.

Note: The Arc lamp should face forward with the arm reaching

over the base (see diagram below).Now you can make sure the

arm curves are aligned and tighten the joints

6. Socket ring (D) comes pre-assembled to the socket. Before placing

the shade onto the socket, please unscrew this socket ring.

7. Place shade (Q) onto socket holder and turn the socket ring (D)

until tight to secure shade.

GENERAL PRODUCT INFORMATION:

This product is suitable

for dry locations only.

---------------------------------------------------------------

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug as a feature to reduce the risk of

electric shock (one blade is larger than the other). This plug will fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician.Do not

use with an extension cord unless the plug can be fully inserted.

ALTER THE PLUG .

----------------------------------------------

BULB TYPE: type A Max 100W bulb (bulb not included).

4209-01

Be sure the curved arm

353 West 39

Street 2

Floor New York, NY 10018

Tel: (212) 736 4440 Fax: (212) 736 4806

www.adessohome.com

1.0

DO NOT