Galvin Engineering CliniMix CP-BS WM-TMVPMB Panduan Instalasi Produk - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Instalasi Produk untuk Produk Pipa Galvin Engineering CliniMix CP-BS WM-TMVPMB. Galvin Engineering CliniMix CP-BS WM-TMVPMB 18 halaman. Hob mounted thermostatic progressive basin mixer - lever
Halaman Cetak
2.0
SAFETY
®
The CliniMix
Thermostatic Progressive Mixing Valve is a high-performance valve designed to give stable
and dependable operation, provided it is installed, commissioned, operated and maintained as per the
recommendations outlined in this manual. It should be noted however that this valve should not be
considered as an alternative to adequate supervision and duty of care during its use and operation.
Note: The mixing valve, inlet controls, pipe work and the surrounding area may become hot when installed which
may cause burn injuries. Precautions should be taken to ensure that these surfaces cannot cause such
3.0
DESCRIPTION
This manual covers the CliniMix
are designed to provide water from ambient cold up to a safe maximum temperature for hand washing. This
mixing valve is supplied with integral isolating valves, strainers, check valves and flow regulators.
The hot side of the body and the inlet is insulated to ensure the body surface is maintained at a safe
temperature when the fitting is in operation.
Avoid using heat for soldering near the mixer inlets to prevent damage to internal components.
4.0
DIMENSIONS
®
CP-BS Hob
Mounted Thermostatic Progressive Basin Mixer -
2
Version 2, 29 May 2020, 2 of 18
Lever. These
If the mounting hole does not already
exist, mark out and drill the hole in the
bench/trough, as shown in rough-in
dimensions.
injuries.