AGS Merlin 1000S+i Panduan Pengguna & Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna & Instalasi untuk Pengontrol AGS Merlin 1000S+i. AGS Merlin 1000S+i 9 halaman. Gas & electric utility controller
Halaman CetakMerlin 1000S+i
Gas & Electric Utility Controller
1
GENERAL INFORMATION
The Merlin 1000S+i is a gas shut off, gas detection & electrical isolation utility controller.
The Merlin 1000S+i can receive connections from remote emergency shut-off buttons, gas
detectors and a CO2 monitor. It can also be integrated with a BMS and fire alarm.
It is recommended that the user reads this guide before using the system.
Please do NOT attempt to operate the unit until the contents of this document have been
read and are thoroughly understood.
2
INSTALLATION & CONNECTION
2.1
Panel Mounting
The control panel is designed for surface mounting using 4 mounting screws.
Removing the cover on the panel gives access to the circuit board.
The PCB should be removed before drilling entry holes into the case.
A flush mount kit is available, comprising of a mounting bracket and decorative surround strip.
Contact your supplier for more information.
2.2
1000S+i Circuit Board Terminals
Rev: 04 Date: 22-10-18
User & Installation Manual
3