Dynisco PT303 Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemancar Dynisco PT303. Dynisco PT303 18 halaman. Strain gage pressure transmitter

From lab to production,

providing a window into the process

1.5 Correct use

The PT303 is designed for measuring pressure in explosive atmospheres (Class I,

Division 1, Groups A, B, C & D) as part of a larger overall system. It contains an

integrated signal amplifier. The PT303 pressure transmitter can be used in media

temperatures up to 170°F. If the pressure transmitter is used in other applications, the

safety and accident prevention regulations specific to that application must be

followed.

1.6 User's obligations

The operator or owner of the larger overall system, e.g. a machine, is responsible for

following the safety and accident prevention regulations that apply to the specific

application.

2. Notes on safety

The operator or owner of the larger overall system is responsible for

following the safety and accident prevention regulations that apply

to the specific application.

Mounting and electrical connection of the PT must be done by specialists

with EMC training, following all applicable regulations, and in

pressureless, voltage-free condition with the machine switched off.

The machine must be secured against being switched back on! Ambient

temperature for the electronics housing max. +170°F.

Higher temperatures can result in damage and malfunction. Do not install

the pressure transmitter in places where this temperature is exceeded.

P/N: 974124

Rev: 1217

www.dynisco.com

-5-

ECO: 27882