Coralife Bio Cube Petunjuk Manual - Halaman 9
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Aksesori Coralife Bio Cube. Coralife Bio Cube 12 halaman. Size 16
Juga untuk Coralife Bio Cube: Petunjuk Manual (13 halaman)
Halaman Cetak
Lighting Start-Up Operation
1. Plug ballast power cords into an outlet or power
source and turn the switches on (Figure 10).
2. Verify that all lamps are lit and functioning
properly (Figure 9).
FIGURE 9
Compact Fluorescent
Lamps
LED Bar
4. Make sure that the cooling fans are on and blowing
across the unit.
FIGURE 10
Air Inlet
WARNING:
Do not obstruct cooling fan air input and cooling fan
air discharge.
Keep canopy vents clean from dust and debris.
OPERATION
Cooling Fan Air Discharge
Switch
Wet/Dry Filter Start-Up Operation
1. Open canopy and remove filter cartridge. Rinse
thoroughly with cool freshwater and reinstall in
1st chamber.
2. Rinse substrate, sand, gravel, rocks, driftwood,
plants and ornaments and add to aquarium.
3. Prepare aquarium water (saltwater/freshwater).
Make sure water is at room temperature to
prevent condensation.
4. Open canopy and slowly add water to the
aquarium. Make sure to fill aquarium up to the
lower edge of the top moulding (Figure 11).
FIGURE 11
Wet/Dry Section
5. Plug water pump power cord into an outlet or
power source. Pump will raise water level in
aquarium section and drain into wet/dry section
(Figure 12).
FIGURE 12
Wet/Dry Section
Aquarium Section
Top Moulding
Fill Level
Aquarium Section
Fill Level