AGS Merlin Panduan Pengguna & Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna & Instalasi untuk Detektor Gas AGS Merlin. AGS Merlin 6 halaman. Refrigerant gas detector tft
Juga untuk AGS Merlin: Panduan Pengguna & Instalasi (5 halaman), Panduan Pemasangan & Pengoperasian (12 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman)
Halaman Cetak
Merlin Gas Detectors
4
Technical Specification
Power supply
Typical Measuring Range
Power Up - Warm Up Time
Low Level Alarm
(pre-alarm)
High level alarm
Volt Free Relay Output
Installation standard
Carbon Monoxide (CO)
Fixed Unit Location Recommendation
Take in to account the design of the air flow within the space. Positioning CO detectors near
draft will greatly diminish their reliability. Multiple detectors may be required to adequately
protect the space.
Rev: 08 Date: 18-10-18
7-30VDC, 80mA max
Methane/LPG/Hydrogen - Semiconductor Type
Gas Sensor
Carbon Monoxide – Electro-Chemical Type
Methane 300-10000 ppm
LPG 300-10000 ppm
Carbon Monoxide 10-10000 ppm
Hydrogen 100-10000 ppm
1 minute
Methane 8%LEL by volume
LPG 0.16% by volume
Carbon Monoxide 30ppm
Hydrogen 8%LEL by volume
Methane 10%LEL by volume
LPG 0.2% by volume
Hydrogen 10%LEL by volume
Carbon Monoxide
30 ppm for 2 hours
50 ppm for 1 hour
100 ppm for 10 minutes
300 ppm for 1 minute
240VAC 500mA, 30VDC 2A switching current (resistive load)
Net weight
180g
Dimensions
(W)x5.27"(H)x3.66"(D)x1.45"
See Section 2
User & Installation Manual
4