AGS Merlin Panduan Pemasangan & Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Detektor Gas AGS Merlin. AGS Merlin 12 halaman. Refrigerant gas detector tft
Juga untuk AGS Merlin: Panduan Pengguna & Instalasi (5 halaman), Panduan Pengguna & Instalasi (6 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman)

Installation & Operation Manual

OPERATION

On connecting mains power, an LED on the front of the panel (AGS Logo) will illuminate red.

1. Turn any fans connected to the system on.

2. Turn the key switch to ON.

Turn the key switch to the off position to turn the panel off.

The emergency shut off button is located on the front of the panel.

There is also a facility for remote shut off buttons to be wired in series on the circuit board.

The emergency shut off button(s) will cut off the gas supply and electrics only when activated.

To reinstate the system, the emergency shut off button(s) will need to be reset and the panel

restarted.



Gas On

When the fans are running and the key switch is

turned on, the Merlin 1500S will open the gas valve

and the Gas-On LED will illuminate.

ON = Gas On

OFF = Gas Off



Supply Fans

Under normal working the LED will illuminate.

If a supply fan fault is detected, the LED will flash.

ON = OK

*FLASHING = One of the supply fans is not running.

*IF SUPPLY AND/OR EXTRACT FANS LED FLASHES FOR MORE THAN 20 SECONDS, THE GAS WILL SHUT OFF.



Extract Fans

Under normal working the LED will illuminate.

If an extract fan fault is detected, the LED will flash.

ON = OK

*FLASHING = One of the extract fans is not running

*IF SUPPLY AND/OR EXTRACT FANS LED FLASHES FOR MORE THAN 20 SECONDS, THE GAS WILL SHUT OFF.

1500S IOM Rev: 08

01-20

Merlin 1500S