Dynojet Power Commander III Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Aksesori Sepeda Motor Dynojet Power Commander III. Dynojet Power Commander III 4 halaman. Fuel adjustment
Juga untuk Dynojet Power Commander III: Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (5 halaman), Petunjuk Instalasi (5 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (5 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (3 halaman), Petunjuk Instalasi (4 halaman), Instruksi Instalasi (5 halaman), Petunjuk Instalasi (4 halaman)

Halaman Cetak
Dynojet Power Commander III Petunjuk Instalasi
i424-411
www.powercommander.com
PCIII harness
Unplug this connector
Stock connectors
PCIII connectors
1
Remove the seat.
2
Remove the fuel tank.
3
Lay the PCIII near the tool kit
temporarily.
4
Route the PCIII harness under
the seat bracket and go towards
the front of the bike (Fig. A).
5
Locate the WHITE 4 pin con-
nector from the throttle bodies
(Fig. B).
This connector is located on the
left hand side of the frame
above the rear cylinder.
6
Unplug this connector.
7
Plug the mating connectors from
the PCIII harness in-line of the
stock wiring harness (Fig. C).
2007 Yamaha XV1300 - PCIII USB - 2