Hikmicro B Series Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera termal Hikmicro B Series. Hikmicro B Series 20 halaman. Handheld
Halaman Cetak
manufacturer. Refer to the product specification for
detailed power requirements.
Battery
● The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
● Use the battery provided by a qualified manufacturer.
Refer to the product specification for detailed battery
requirements.
● For long-term storage of the battery, make sure it is
fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
● When the device is powered off and the RTC battery is
full, the time settings can be kept for 4 months.
● Before the first use, charge the lithium battery for more
than 8 hours.
Maintenance
● If the product does not work properly, please contact
your dealer or the nearest service center. We shall not
assume any responsibility for problems caused by
unauthorized repair or maintenance.
● Wipe the device gently with a clean cloth and a small
quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified by
the manufacturer, the protection provided by the
device may be impaired.
● Your camera will periodically perform a self-calibration
to optimize image quality and measurement accuracy.
In this process the image will pause briefly and you will
hear a "click" as a shutter moves in front of the detector.
The self-calibration will be more frequent during the
startup or in very cold or hot environments. This is a
normal part of operation to ensure optimum
performance for your camera.
Calibration Service
We recommend you send the device back for calibration
once a year, and please contact the local dealer for the
information on maintenance points. For more detailed
calibration services, please visit HIKMICRO official
website.
Technical support
The https://www.hikmicrotech.com portal will help you
as a HIKMICRO customer to get the most out of your
HIKMICRO products. The portal gives you access to our
support team, software and documentation, service
contacts, etc.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating temperature
shall be -10°C to 50°C (14°F to 122°F), and the
operating humidity shall be 95% or less.
● DO NOT expose the device to high electromagnetic
radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright
light.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Manufacture Address:
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing
Subdistrict, Binjiang District, Hangzhou, Zhejiang
310052, China
Hangzhou Microimage Software Co., Ltd.
iv