CORBERO FD 3290 I Buklet Instruksi - Halaman 10

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kulkas CORBERO FD 3290 I. CORBERO FD 3290 I 11 halaman.

MAINTENANCE

Unplug the appliance before carrying out any

maintenance operation.

Clean the interior periodically with lukewarm water

and some sodium bicarbonate; the cabinet exterior

with a silicone wax spray; the condenser and the mo-

tor compressor with a brush or a vacuum cleaner.

During periods when the appliance is not in use, take

the following precautions:

unplug the appliance from the power supply;

remove all foodstuffs from the appliance;

clean the interior and all accessories;

leave the doors ajar to allow air to circulate inside the

cabinet so as to prevent the formation of unpleasant

odours.

If the appliance is not functioning properly check that:

the plug is ﬁrmly in the wall socket and the mains

power switch is on;

there is no power failure; the control knob is in the

right position.

If there is water on the fridge bottom, make sure the

defrost water drain hole is not clogged (Fig. 17).

The light inside the refrigerator compartment is easy

to get at through the opening in the light holder.

If the light does not go on when the door is open,

check that it is screwed into place properly.

If it still does not light up, change the bulb.

The rating is shown on the light bulb cover.

D025

To do this, use the cleaner provided which can be

found in the drain hole.

If your appliance is still not working properly after

making the above checks, contact your local dealer or

the nearest service center.

To obtain fast service, it is essential that when you ap-

ply for it you specify the model and serial number of

your appliance which can be found on the warranty

certiﬁcate or inside the appliance on the rating plate.

Fig. 19