Dynojet POWER VISION 3 Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil Dynojet POWER VISION 3. Dynojet POWER VISION 3 8 halaman. 2020-2021 honda rubicon/foreman/trx520
Juga untuk Dynojet POWER VISION 3: Panduan Instalasi (9 halaman), Panduan Instalasi (7 halaman), Panduan Instalasi (8 halaman)
Halaman Cetak
GETTING STARTED
Use the Tune File Wizard to prepare your Power Vision
device with the stock (stk) and tune (djt) files needed to
flash your vehicle.
1
Connect the Power Vision to the vehicle.
2
Turn the key on. The Power Vision will scan for files.
There are three possible file states:
File State 1: No compatible tune or stock files.
File State 2: No compatible tune files.
File State 3: All required files found.
File State 1:
Press the Enter
button for ECU read
to begin the tuning
process. This process
takes about fifteen
minutes.
File State 2:
GETTING
STARTED
NO
COMPATIBLE
STOCK
FILES
AnECUreadiirequire:ttobegmthe
tuningµroces.s..
PRESS
C
TO READ ECU
PRESSt>TOEXITwtlA!lll
3
Gauges are displayed.
Go to
tunes.dynojet.com/
to
download tune files.
CONNECT
ECU
File State 3:
Connect the Power Vision to the
vehicle diagnostic port to collect
ECU
information.
Turn the key on.
Please connect
to the vehicle
diagnostic port
to continue.
PRESS
t>TORETURN
All
required files
found. The Power
Vision
is
ready to flash a tune to the
connected vehicle.
FLASHING YOUR
VEHICLE
The Power Vision must be paired to the connected
vehicle
ECU
to function properly.
Note: Once paired to the vehicle ECU, the Power Vision will
not work on another vehicle without purchasing a tune
license.
1
From the Main Menu, select Flash Tune.
2
Select the tune file (.djt) and press Enter to view
the
Tune Info.
Note: The Dynojet
tune
file (.djt)
is
a tune file which is
different (better than stock performance or the necessary
file when bolting on an exhaust, for example); the stock file
(.stk) is the direct duplicate of what the OEM shipped.
3
Press Enter to accept the tune and pair the Power Vision to the
vehicle.
Note: Pair to vehicle will only happen on the first flash.
4
Press Enter to pair and
lock
the Power Vision to the ECU and to
begin the flash. Do not turn off the key switch or disconnect
the
Power Vision during the flash.
5
After the flash
is
complete, turn the key off and wait 45 seconds
before turning
the
key back on to start.
4
HARLEY-DAVIDSON
INSTALLATION
GUIDE
VEHICLE TOOLS
DEVICE TOOLS
NOT PAIRED
PAIR THIS DEVICE
TO
THE
CONNECTED
VEHICLE?
PRESSOTOCOlfflNUE
PflESS'!>IORETURN
CI 502TA301.djt
FLASH TUNE
I
FLASH ECU WITH SELECTED
TUNE
FILE?
PRESSOTOCONTINU[
PR!SS
t,
TO
RETURN
READ ECU
AN
ECU READ
CAN TAKE UP TO
15 MINUTES
TO
COMPLETE
GETTING
STARTED
NO COMPATIBLE
TUNE FILES
Talkl11dJ~ILJ!e>,IM:
TUNES.OYNOJET.COM/
PRESS
OTO
SEARCH
AGAIN
READY TO FLASH
All REQUIRED
FILES
FOUND
PRESSCTOREAOECU
PRESSt>TOEXJTWIZARO
TUNE INFO
FILE:C1~01TA101.dJt
TUNER
COMPATS
DESCRIPTION,20!7fouting
t!ll1Bf824
Stackhh;tUSI
S1c:klntake
PRESS
C
TO START
ECU
f!ASH
98200108