AGS Mini Merlin CH4CO Panduan Pemasangan & Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Sensor Keamanan AGS Mini Merlin CH4CO. AGS Mini Merlin CH4CO 16 halaman. Dual gas detector, methane & carbon monoxide gas
Juga untuk AGS Mini Merlin CH4CO: Panduan Pengguna (16 halaman)

Halaman Cetak
Installation & Operation Manual

INSTALLATION

Planning

Our monitors should be installed in areas at risk of gas leaks e.g. over boilers, valves or meters.
Take in to account the design of the air flow patterns within the zone area.
Detectors should be installed in the correct orientation, as recommended by the
manufacturer, and ease of access should be accounted for to allow for any bump tests,
recalibration and other forms of maintenance.
Areas to avoid
Avoid conditions of any other environmental factors that could potentially impede the
accuracy and operation of the detector such as; condensation; vibration; temperature,
pressure, the presence of other gases, electromagnetic interference and draft zones.
Area of coverage
Consider the coverage required and function of the area. Emphasis should be placed on
airflow patterns and correct placement, not perceived detecting ranges. The target gas will
only be identified when contact is made with the sensing element itself.
Multiple detectors may be required to adequately protect property and persons.

Typical Location and Positioning

Locations for detectors will vary based on the intended application, they should be located
near identified sources of a potential gas leaks/ pockets where hazardous gas could quickly
accumulate and areas of identified consequential risk.
(6ft) from sources of combustion i.e. boilers/heaters and gas fired cooking appliances etc.
a)
(4ft) from draft zones and ventilation areas i.e. windows, doorways and A/C units etc.
b)
(5ft) from ground level.
c)
Recommended heights may vary based on air flow and temperature conditions in addition to
the proposed application and location. The device should be mounted near the boiler or gas
fired appliance/s such as domestic & commercial boiler rooms and basements.
When choosing your location, make sure you are able to hear the alarm from all areas.
Rev: 12 01-20
AGS Mini Merlin CH4CO
5