Main Heating Main Eco Elite Combi 30 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Ketel uap Main Heating Main Eco Elite Combi 30. Main Heating Main Eco Elite Combi 30 20 halaman. Condensing central heating boiler
Halaman Cetak
Reset
ON/OFF/Reset
Selector Switch
Reset
OFF Position
The boiler will not operate.
Display
2
1
3
0
4
bar
© Baxi Heating UK Ltd 2015
Display
Central Heating
Temperature Control
Reset
Central Heating & Hot Water
Both Heating & Hot Water will operate.
Central Heating Indicator - The indicator will illuminate when the boiler is in the central
heating mode.
Domestic Hot Water Indicator - The indicator will illuminate when hot water is being
supplied to a tap or shower.
Burner On Indicator - The indicator will illuminate when the burner has fired and is heating
your central heating or domestic hot water.
Boiler Output Temperature - In either the central heating or domestic hot water position
the display will illuminate showing the current boiler temperature in degrees centigrade.
Central Heating Temperature Control
Turn the knob clockwise to increase or anticlockwise to decrease the temperature.
Range 25 - 80° C.
Domestic Hot Water Temperature Control & Pre-heat Selector
Turn the knob clockwise to increase or anticlockwise to decrease the temperature.
Range 40 - 60° C. It also activates the 'Intelligent Pre-heat' feature - see Section 4.0.
Central Heating System Pressure - The normal operating water pressure is shown when the
needle is in the GREEN section of the gauge, between 1 and 2.5 bar. If the pressure exceeds 3
bar (needle in the RED section) the safety pressure valve will operate and a fault is indicated.
Contact your Installer.
1.0 Quick Reference Guide
Domestic Hot Water
Temperature Control
& Pre-heat Selector
Reset
Domestic Hot Water
Hot Water will operate.
2
1
3
0
4
bar
System Pressure Gauge
Timer (when fitted)
Reset
Reset
Hold for approx 5 seconds and release.
Position of
3