AFL FOCIS Flex Panduan Referensi Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Instrumen Analitik AFL FOCIS Flex. AFL FOCIS Flex 16 halaman. Fiber optic connector inspection system

Halaman Cetak
In the Live Image mode, press the Capture key
•
– Auto Focus image (if the Auto Focus option is enabled)
– Capture the displayed image and enter the Captured Image mode
– Analyze image (if the Pass/Fail option is enabled)
– Save results and send image to Bluetooth-paired device (if auto-save and
auto-send enabled on "1st Capture Key", see page 12 for details)
– If auto-save or auto-send enabled on "2nd Capture Key" (see page 12),
press the Capture key again to save and/or send
In Captured Image mode, press the Capture key to return to Live Image mode.
•
In the Main Menu or Settings modes, press the Capture key to return to the most
•
recent Live or Captured Image mode.
The Main Menu is accessed from Live Image mode by pressing the Menu
While in the Main Menu, press Up/Down
•
(highlight) the desired menu option.
– Settings: Configure Auto Focus, Pass/Fail, Bluetooth, etc.
– Results Manager: Navigate and Review or Send saved test results
– Last Image: Recall most recently viewed image
– WiFi: Configure WiFi for remote access (future)
– Device Info: View serial number, software rev, etc.
Press Select or Right arrow key to display the selected option sub-screen.
•
While in a sub-screen, press Up/Down
•
the desired option.
– Press Select soft key or Right arrow key to edit highlighted parameter
– When selected parameter displays On/Off icon
enable/disable
Press Back soft key to return to the previous menu screen.
•
Capture Key Operation
User Settings and Controls
to perform the following:
arrow keys to navigate and select
arrow keys to navigate and highlight
/
6
soft key.
, press Select to