Gama Garden GT- 390 GT- 395 Buku Petunjuk - Halaman 3
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Anakan Gama Garden GT- 390 GT- 395. Gama Garden GT- 390 GT- 395 14 halaman. Petrol powered cultivator
Halaman Cetak
During work performance wear protective clothing,
secure footgear, goggles and gloves
Do not refill the cultivator fuel tank while operating.
Petrol is allowed to be refilled only outdoors
Perform the work far away from open flames and
sparks and avoid smoking
Do not touch the rotary blades of the cultivator by your
hand, foot or even your clothing. The cultivator motor,
exhaust silencer and reducer will warm up during the
work performance and cool down continually
The engine can be stopped in the following cases
When the work performance with the cultivator is
finished
;
During maintenance and adjustment operations
When the cultivator is relocated from a working site
to another
Store the cultivator and the petrol in a place unreachable
for children and at a safe distance from sparks, fire and
radiators
.
Prior to locating the cultivator in a closed room for
permanent storage, wait for the motor to cool down
entirely
.
The
parts
must
manufacturer's specifications. Use only original parts.
The cultivator may be repaired only by an authorised
service repair shop
Safety engineering devices
Safety engineering devices protect the user from injuries
possibly occurring during the work performance therefore they
should always be in operable condition.
Do not change or block the operation of the safety engineering
devices in any way.
Clutch lever
When the clutch lever is released, the cultivator rotary blades
will stop
.
Starter switch
If the starter switch is turned "OFF" ("turned off") position then the
engine will stop.
Guard
It will protect the user from injuries caused by pieces of soil
flying out from under the cultivator rotary blades
Handlebar cross-tube
It will ensure the distance between the user and the cultivator
rotary blades
.
Belt transmission guard
It covers the V-belt during the operation of the cultivator.
Information on the cultivator
For ensuring safe operation and maintenance of the
cultivator, each symbol can be seen on the device in the form
of die stamped or projected picture.
Place of fuel refilling.
Location: on the fuel tank cover
Indication of engine of top valve arrangement.
OHV
Location: on the cover of the valve mechanism
Indication of engine of top shaft arrangement
OHC
Elhelyezés: on the cover of the valve
mechanism
.
ATTENTION: Hot surface!
Location: on the cover of the exhaust silencer
START
Location: on the handle of the pull cord.
.
.
.
.
:
be
in
compliance
with
.
.
.
Stickers of operations to be done by the
controls
Depending on the engine model, stickers and their arrangement
may differ from those included in the instruction manual.
RH
;
F
1
F
2
I / ON
0 / OFF
the
Warning symbols
There is a sticker containing warning symbols on the
cultivator guard. Prior to starting the operation, get acquainted
with these warnings and apply them during your work
Prior to starting to use the cultivator, read the
instruction manual, but mainly the section "For
your safety".
Risk of injury by the rotary blades
Keep your hand and feet away at a safe
distance from the rotary blades
Risk of injury or risk of damaging the objects
found nearby. Make sure that all unauthorised
persons, including children and domestic animals
are staying out of the efficiency range of the
cultivator
Risk of injury by objects flying out from under
the cultivator.
THE GUARD BEING INSTALLED.
Prior to performing the cultivator maintenance,
remove the cap of the high voltage line from the
spark-plug of the motor
Symbols found in the instruction manual
The following symbols are found in the instruction manual
It draws the user's attention to such sources of
Danger!
danger which may cause injury to the user during the work
performance with the cultivator
.
Warning!
It draws the attention to such sources of danger which may
cause damage to the cultivator in case of improper use
Air valve control
To the left –"Fully closed"
To the right –"Fully open"
Fuel cock
To the right –"Open". To the left –"Closed".
Location: on the carburettor case
Speed changer speeds
RH – reverse.
1, 2 – first/second speed. F – coast.
Location: on the speed changer
Starter switch
Location: on the engine case.
Butterfly valve control.
"Rabbit"/
revolution
.
"Turtle"/
Location: on the engine case.
.
DO NOT WORK WITHOUT
.
.
Max
-
- Min
revolution
.
.
.
:
.
3