Dynojet 2009 Yamaha FZ1 Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Catu Daya Dynojet 2009 Yamaha FZ1. Dynojet 2009 Yamaha FZ1 4 halaman. Power commander

FIG.A

FIG.B

FIG.C

22-015 www.powercommander.com

Remove the main seat and the passenger seat.

Prop the front of the fuel in the up position.

Lay the PCV in the tail section temporarily. Route the PCV harness

under the tail section and go towards the front of the bike.

Locate the connector from the main wiring harness to the injector rail

and uplug this connector (Fig. A).

NOTE: This connector is grey in color.

Plug the connectors from the PCV in-line of the stock wiring harness

(Fig. B).

Remove the bolt on the left hand side of thefuel tank bracket and

loosen the right hand bolt enough to route the PCV harness under-

neath it (Fig. C).

Re-tighten the bracket.

2009 Yamaha FZ1 PCV - 3