Gama Sonic 120010 Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Lampu luar ruangan Gama Sonic 120010. Gama Sonic 120010 4 halaman. Solar up and down wall light

Halaman Cetak

Please read the instruction manual carefully to obtain the best results from your

purchase.

NOTE: If you are replacing an existing gas/electric wall light, you must consult a

certified technician to disconnect the current outlet before installation.

Solar Wall Light Location

For optimum light duration throughout the night, it is very important to mount your

solar light in a spot where it will receive the maximum amount of direct sunlight

throughout the day. A minimum of 2 hours of direct sunlight is required for basic

operation.

NOTE: The following steps are for reference only. Consult your local hardware store

for the best installation method for your chosen surface.

Assembly Instructions (Fig. 1):

Step 1:

Remove the wall bracket by unscrewing the two screws on the side of the fixture.

Step 2:

You are ready to mount the light fixture on

the wall.

1. Use a drill to make two holes in the wall

where the lamp will be mounted. (use the

wall bracket as a template for drilling

locations)

2. Place the anchors into the holes and place

the wall bracket in line with the holes.

3. Secure using the provided screws.

Step 3:

Attach the light to the wall bracket using the

screws you removed in Step 1.

Fig. 1