HIKOB GATEWAY H-GW103A Panduan Instalasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat Keras Jaringan HIKOB GATEWAY H-GW103A. HIKOB GATEWAY H-GW103A 12 halaman.
Juga untuk HIKOB GATEWAY H-GW103A: Panduan Instalasi (11 halaman), Panduan Memulai Cepat (2 halaman)
Halaman CetakHIKOB GATEWAY
Document version 2017V2-EN
an embedded REST server. Information exposed by the HIKOB GATEWAY can therefore be
integrated in a 3rd party information system. HIKOB GATEWAY provides as well services to
configure HIKOB sensors, and to perform basic maintenance such as firmware update.
The HIKOB GATEWAY is not energy-autonomous: it is powered by the PoE technology
(Power over Ethernet) through an Ethernet cable.
Models A and B of the HIKOB GATEWAY can be installed and used outdoor. The HIKOB
GATEWAY casing is water resistant with an IP65 protection. The first number 6 identifies
protection against complete ingress of dust, the second number 5, identifies protection against
the effects of spraying water. Should you decide to perform cleaning tasks on the HIKOB
GATEWAY, don't perform high pressure cleaning, prefer wiping with a dry cloth, or with a
neutral agent.
Radio and GPS antennas are integrated into the envelope of the HIKOB GATEWAY, which
are delivered all assembled and ready to be fastened on a pole or a wall, please refer to the
Installation section for details.
.
3. Data sheet
Power supply Power over Ethernet with RJ45 connector following the 802.3at, 802.3af norm.
(which corresponds for this product to 36 - 57 VDC, 0.1Amax).
Packaging
IP65 according to EN 60529
Dimensions
22 x 12 x 3.8 cm
Weight
360g
Temperature
Operating and Storage -20°C +60°C
Radio
Frequency Band
Protocol
IEEE 802.15.4e
Antenna gain +3dBi
Input level sensitivity -101dBm
Output power
Range
2.4GHz ISM
+4dBm
30m to a buried sensor
2017 · Page 8/12