Gama Sonic GS-94NS Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Lampu luar ruangan Gama Sonic GS-94NS. Gama Sonic GS-94NS 5 halaman. Victorian solar lamp

Tools that are needed but not supplied with the high post solar lamp set are: a screw

driver, a wrench and an electrical drill that will be used to anchor the lamp base to the

ground.

Solar Lamp Post Location

For optimum light duration throughout the night, it is very important to mount your

solar lamp post in a spot where it will receive the maximum amount of direct sunlight

throughout the day.

Assembly Instructions

NOTE: The following steps are for reference only. Consult your local hardware store

for the best installation method for your particular surface.

NOTE: The solar light must be charged for two sunny days in the "ON" position for

best results.

GS-94S

1. Turn the On/Off switch in the lamp head (A) to Low or High position

(Fig. 1).

2. Use electric drill to make three holes into a solid surface no smaller

than the fastening screws (G). The holes shall be lined up with the

holes of the lamp base (F).

NOTE: For installation in the ground where pouring concrete is not

preferred or possible, use our GS-3 EZ Lamp Post Anchor (sold

separately) to quickly and easily secure the lamp anywhere in your

yard.

3. Put the fastening screws (G) into the drilled holes with their threaded

ends facing up.

4. Place lamp base onto fastening screws and secure base with the nuts

using a wrench. Cover the bolts with the plastic covers provided.

5. Make sure the lamp base (F) is stable before installing Part (E).

6. Place part (E) on top of part (F) and tighten with the provided screws

using a wrench.

Fig. 1

7. Screw part (D) to part (E), part (C)

to part (D) and part (B) to part (C).

Fig. 2