Hikobike Pulse Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Hikobike Pulse. Hikobike Pulse 16 halaman.
Halaman Cetak
INSTALLING AND REMOVING THE BATTERY
To remove the battery from the frame, unlock the battery using the key, at the same time using the
battery lift out handle, pull the battery up and out.
To install the battery, insert the battery into the bottom of the battery frame, then push down on
the top the battery to locate the locking pin.
BATTERY WARNINGS
The Li-Ion battery is one of the major components on the HIKO ebike and great effort should be
taken to look after it.
•
Always handle with great care. No not drop or allow it to be struck.
•
Do not take the battery casing apart or tamper with the battery.
•
Keep it away from Children.
•
Keep it away from temperatures above 50 deg C
•
Never allow a connection between the electrical contacts
•
If you suspect the battery is damaged or not working suitable contact your dealer.
The Dealer can have the battery checked and diagnosed using the built-in battery management
system.
6